Zwei Grafikkarten unter Suse 10.3 ?

A

a noope

New Member
Hallo ihr,
ich bin gerade von Windos XP zu Suse 10.3 umgestiegen. Jetzt habe ich das Problem, dass ich sowohl eine PCI- als auch eine AGP-Grafikkarte nutze um zwei Monitore gleichzeitig zu betreiben. Linux erkennt aber nur die AGP-Karte. Was kann ich tun um das zu ändern??

Danke schon mal im Voraus für eure Tipps.
 
A

a noope

New Member
AW: Zwei Grafikkarten unter Suse 10.3 ?

Jacko schrieb:
Erstmal wären mehr Informationen eine gute Grundlage...

Frei nach http://www.pc-forum24.de/sonstige/2976-users4users-poste-ich-bei-welchem-problem.html empfehle ich:

Code: 
/sbin/lspci 
/usr/sbin/hwinfo --gfxcard
Grüße

Jacko
Zum Vergrößern anklicken....
Erstmal wären mehr Informationen eine gute Grundlage...
Ich hab alles an infos dazugegeben was ich finden konnte.

Hier noch ein paar infos:
Code: 
basti@basti-...:~> /sbin/lspci
00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0a.0 VGA compatible controller: S3 Inc. 86c968 [Vision 968 VRAM] rev 0
00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5500] (rev a1)
Code: 
basti@basti-...:~> /usr/sbin/hwinfo --gfxcard
17: PCI 0a.0: 0300 VGA compatible controller (VGA)
  [Created at pci.301]
  UDI: /org/freedesktop/Hal/devices/pci_5333_88f0
  Unique ID: bSAa.R_a4_fAAY_5
  SysFS ID: /devices/pci0000:00/0000:00:0a.0
  SysFS BusID: 0000:00:0a.0
  Hardware Class: graphics card
  Model: "S3 86c968 [Vision 968 VRAM] rev 0"
  Vendor: pci 0x5333 "S3 Inc."
  Device: pci 0x88f0 "86c968 [Vision 968 VRAM] rev 0"
  Memory Range: 0x40000000-0x43ffffff (rw,non-prefetchable,disabled)
  Memory Range: 0x44000000-0x4400ffff (ro,prefetchable,disabled)
  IRQ: 5 (no events)
  Module Alias: "pci:v00005333d000088F0sv00000000sd00000000bc03sc00i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown

31: PCI 100.0: 0300 VGA compatible controller (VGA)
  [Created at pci.301]
  UDI: /org/freedesktop/Hal/devices/pci_10de_326
  Unique ID: VCu0.LNnkv7O5L2D
  Parent ID: vSkL.CP+qXDDqow8
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce FX 5500"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0326 "GeForce FX 5500"
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xec000000-0xecffffff (rw,non-prefetchable)
  Memory Range: 0xd0000000-0xdfffffff (rw,prefetchable)
  Memory Range: 0xed000000-0xed01ffff (ro,prefetchable,disabled)
  IRQ: 20 (144621 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000326sv00000000sd00000000bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nvidia
  Driver Info #1:
    XFree86 v4 Server Module: nvidia
    3D Support: yes
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #16 (PCI bridge)

Primary display adapter: #31



Mfg a noope.
 
J

Jacko

Moderator
AW: Zwei Grafikkarten unter Suse 10.3 ?

Da mir gerade ein Rechner mit zwei Grafikkarten fehlt, weiß ich nicht sicher, ob sax2 die Einrichtung einer zweiten Graka unterstützt.

Dies kannst Du aber einfach mit einem
Code: 
kdesu sax2
(falls Du KDE User bist) testen.

Geht das nicht, poste bitte zusätzlich zu den anderen Infos:
Code: 
grep -i Device /etc/X11/xorg.conf -B 8
Grüße

Jacko
 
A

a noope

New Member
AW: Zwei Grafikkarten unter Suse 10.3 ?

Code: 
basti@basti-...:~> grep -i Device /etc/X11/xorg.conf -B 8
 FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
 FontPath "/usr/share/fonts/hellas/misc:unscaled"
 FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
 FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
 FontPath "/usr/share/fonts/hellas/Type1"
 FontPath "/usr/share/fonts/misc/sgi:unscaled"
 FontPath "/usr/share/fonts/xtest"
 FontPath "/opt/kde3/share/fonts"
 InputDevices "/dev/gpmdata"
 InputDevices "/dev/input/mice"
 --
 Load "freetype"
 Load "type1"
 Load "dbe"
 Load "glx"
 Load "extmod"
 Load "vnc"
 EndSection
 
 Section "InputDevice"
 --
 Option "Protocol" "Standard"
 Option "XkbLayout" "de"
 Option "XkbModel" "microsoftpro"
 Option "XkbRules" "xfree86"
 Option "XkbVariant" "nodeadkeys"
 EndSection
 
 
 Section "InputDevice"
 Driver "mouse"
 Identifier "Mouse[1]"
 Option "Buttons" "5"
 Option "Device" "/dev/input/mice"
 Option "Name" "ImPS/2 Generic Wheel Mouse"
 Option "Protocol" "explorerps/2"
 Option "Vendor" "Sysp"
 Option "ZAxisMapping" "4 5"
 EndSection
 
 Section "InputDevice"
 Driver "rfbkeyb"
 Identifier "Keyboard[2]"
 Option "InputFashion" "VNC"
 EndSection
 
 Section "InputDevice"
 --
 SubSection "Display"
 Depth 24
 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
 EndSubSection
 SubSection "Display"
 Depth 8
 Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
 EndSubSection
 Device "Device[0]"
 Identifier "Screen[0]"
 Monitor "Monitor[0]"
 EndSection
 
 
 Section "Device"
 BoardName "GeForce FX 5500"
 BusID "1:0:0"
 Driver "nvidia"
 Identifier "Device[0]"
 --
 Screen 0
 VendorName "NVidia"
 EndSection
 
 
 
 Section "ServerLayout"
 Identifier "Layout[all]"
 InputDevice "Keyboard[0]" "CoreKeyboard"
 InputDevice "Mouse[1]" "CorePointer"
 InputDevice "Keyboard[2]" "ExtraKeyboard"
 InputDevice "Mouse[3]" "ExtraPointer"

Grüße
a noope
 
Um antworten zu können musst du eingeloggt sein.
Oben