Was meinst Du damit? Wie kann man ein Modul "explizit" für SuSE 10.2 bauen? Vielleicht kannst Du deine Vorgehensweise ja mal posten, so als kleines How-To - oder kennst eine gute Seite auf der man das Nachlesen kann. Wäre echt super.shubak schrieb:
sh ati-driver-installer-8.32.5-x86.x86_64.run --help
Makeself version 2.1.3
1) Getting help or info about ati-driver-installer-8.32.5-x86.x86_64.run :
ati-driver-installer-8.32.5-x86.x86_64.run -h|--help Print this message
ati-driver-installer-8.32.5-x86.x86_64.run -i|--info Print embedded info : title, default target directory, embedded script
ati-driver-installer-8.32.5-x86.x86_64.run -l|--list Print the list of files in the archive
ati-driver-installer-8.32.5-x86.x86_64.run -c|--check Checks integrity of the archive
ati-driver-installer-8.32.5-x86.x86_64.run --extract NewDirectory Extract this package to NewDirectory only
2) Running ati-driver-installer-8.32.5-x86.x86_64.run :
ati-driver-installer-8.32.5-x86.x86_64.run [options] [additional arguments to embedded script] with following options (in that order)
--keep Do not erase target directory after running the embedded script
Following arguments will be passed to the embedded script:
--install Install the driver(default)
[B] --listpkg List all the generatable packages
--buildpkg package Build "package" if generatable ("package" as returned by --listpkg)[/B]
sh ati-driver-installer-8.32.5-x86.x86_64.run --listpkg
Package Maintainer(s): Stefan Dirsch <sdirsch@suse.de>
Status: Verified
SuSE Packages:
SuSE/NLD9-AMD64
SuSE/SLES9-AMD64
SuSE/SUSE91-AMD64
SuSE/NLD9-IA32
SuSE/SLES9-IA32
SuSE/SUSE91-IA32
SuSE/SUSE100-AMD64
SuSE/SUSE92-AMD64
SuSE/SUSE93-AMD64
SuSE/SUSE100-IA32
SuSE/SUSE92-IA32
SuSE/SUSE93-IA32
SuSE/SLED10-AMD64
SuSE/SLES10-AMD64
SuSE/SUSE101-AMD64
SuSE/SLED10-IA32
SuSE/SLES10-IA32
SuSE/SUSE101-IA32
[B]SuSE/SUSE102-AMD64
SuSE/SUSE102-IA32[/B]sh ati-driver-installer-8.32.5-x86.x86_64.run --buildpkg SuSE/SUSE102-AMD64fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.1)Dec 20 00:31:58 sky kernel: [fglrx:drm_parse_option] *ERROR* "agplock" is not a valid option
Dec 20 00:31:58 sky kernel: [fglrx] Maximum main memory to use for locked dma buffers: 432 MBytes.
Dec 20 00:31:58 sky kernel: [fglrx] AGP detected, AgpState = 0x1f000213 (hardware caps of chipset)
Dec 20 00:31:58 sky kernel: agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Dec 20 00:31:58 sky kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
Dec 20 00:31:58 sky kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
Dec 20 00:31:58 sky kernel: [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
Dec 20 00:31:58 sky kernel: [fglrx] total GART = 134217728
Dec 20 00:31:58 sky kernel: [fglrx] free GART = 118222848
Dec 20 00:31:58 sky kernel: [fglrx] max single GART = 118222848
Dec 20 00:31:58 sky kernel: [fglrx] total LFB = 134217728
Dec 20 00:31:58 sky kernel: [fglrx] free LFB = 122679296
Dec 20 00:31:58 sky kernel: [fglrx] max single LFB = 122679296
Dec 20 00:31:58 sky kernel: [fglrx] total Inv = 0
Dec 20 00:31:58 sky kernel: [fglrx] free Inv = 0
Dec 20 00:31:58 sky kernel: [fglrx] max single Inv = 0
Dec 20 00:31:58 sky kernel: [fglrx] total TIM = 0Bei YaST2 wird übrigens der ATI-Treiber brav angegeben, auch die 3D-Beschleunigung ist angehakt, aber nichts dergleichen wird realisiert.
rpm -qa|egrep 'kernel|fglrx|expat|gcc|make'
uname -r
sudo egrep 'WW|EE' /var/log/Xorg.0.log
grep -i Driver /etc/X11/xorg.confsu
Passwort
sh ati-driver-irgendwas.runsu
Passwort
init 3
sax2 -r -m 0=fglrx
init 5....
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection
.....
Section "Device"
BoardName "R350 NH"
BusID "1:0:0"
Driver "fglrx"
Identifier "Device[0]"
#Option "NoDDC"
Option "UseInternalAGPGART" "no"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "locked-userpages=0"
VendorName "ATI"
EndSection
...Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
... (hier abgekürzt)
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "IgnoreABI" "on"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "microsoftpro"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "10"
Option "Device" "/dev/input/mice"
Option "Name" "Microsoft Optical Mouse with Tilt Wheel"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 386 290
HorizSync 31-64
Identifier "Monitor[0]"
ModelName "1280X1024@60HZ"
VendorName "--> VESA"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "RV280 5960"
BusID "2:0:0"
Driver "radeon"
Identifier "Device[0]"
Option "FSAADisableGamma" "no"
Option "CapabilitiesEx" "0x00000000"
Option "ScreenOverlap" "0"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "mtrr" "off"
Option "FSAAMSPosX4" "0.000000"
Option "ForceGenericCPU" "no"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAScale" "1"
Option "FSAAMSPosY3" "0.000000"
Option "Capabilities" "0x00000000"
Option "GammaCorrectionI" "0x00000000"
# Option "no_accel" "no"
Option "FSAAMSPosY4" "0.000000"
Option "UseFastTLS" "0"
Option "FSAAMSPosY5" "0.000000"
Option "FSAACustomizeMSPos" "no"
Option "FSAAEnable" "no"
Option "BlockSignalsOnLock" "on"
Option "GammaCorrectionII" "0x00000000"
Option "KernelModuleParm" "locked-userpages=0"
Option "FSAAMSPosX0" "0.000000"
Option "no_dri" "no"
Option "VideoOverlay" "on"
Option "UseInternalAGPGART" "no"
Option "PseudoColorVisuals" "off"
Option "StereoSyncEnable" "1"
Option "FSAAMSPosX1" "0.000000"
Option "OpenGLOverlay" "off"
Option "FSAAMSPosX2" "0.000000"
Option "Stereo" "off"
Option "FSAAMSPosX3" "0.000000"
Option "CenterMode" "off"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
Option "DAMAGE" "false"
EndSection (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/local" does not exist.
(WW) The directory "/usr/share/fonts/PEX" does not exist.
(WW) The directory "/usr/share/fonts/latin2/misc" does not exist.
(WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist.
(WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist.
(WW) The directory "/usr/share/fonts/latin2/Type1" does not exist.
(WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist.
(WW) The directory "/usr/share/fonts/baekmuk" does not exist.
(WW) The directory "/usr/share/fonts/japanese" does not exist.
(abgekürzt)
(II) Loading extension MIT-SCREEN-SAVER
(WW) RADEON: No matching Device section for instance (BusID PCI:2:0:1) found
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xdfffd800 is: 0xdfffd800
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
(WW) RADEON(0): Option "FSAADisableGamma" is not used
(WW) RADEON(0): Option "CapabilitiesEx" is not used
(WW) RADEON(0): Option "ScreenOverlap" is not used
(WW) RADEON(0): Option "FSAAMSPosY0" is not used
(WW) RADEON(0): Option "FSAAMSPosY1" is not used
(WW) RADEON(0): Option "FSAAMSPosX4" is not used
(WW) RADEON(0): Option "ForceGenericCPU" is not used
(WW) RADEON(0): Option "FSAAMSPosX5" is not used
(WW) RADEON(0): Option "FSAAMSPosY2" is not used
(WW) RADEON(0): Option "FSAAScale" is not used
(WW) RADEON(0): Option "FSAAMSPosY3" is not used
(WW) RADEON(0): Option "Capabilities" is not used
(WW) RADEON(0): Option "GammaCorrectionI" is not used
(WW) RADEON(0): Option "FSAAMSPosY4" is not used
(WW) RADEON(0): Option "UseFastTLS" is not used
(WW) RADEON(0): Option "FSAAMSPosY5" is not used
(WW) RADEON(0): Option "FSAACustomizeMSPos" is not used
(WW) RADEON(0): Option "FSAAEnable" is not used
(WW) RADEON(0): Option "BlockSignalsOnLock" is not used
(WW) RADEON(0): Option "GammaCorrectionII" is not used
(WW) RADEON(0): Option "KernelModuleParm" is not used
(WW) RADEON(0): Option "FSAAMSPosX0" is not used
(WW) RADEON(0): Option "no_dri" is not used
(WW) RADEON(0): Option "VideoOverlay" is not used
(WW) RADEON(0): Option "UseInternalAGPGART" is not used
(WW) RADEON(0): Option "PseudoColorVisuals" is not used
(WW) RADEON(0): Option "StereoSyncEnable" is not used
(WW) RADEON(0): Option "FSAAMSPosX1" is not used
(WW) RADEON(0): Option "OpenGLOverlay" is not used
(WW) RADEON(0): Option "FSAAMSPosX2" is not used
(WW) RADEON(0): Option "Stereo" is not used
(WW) RADEON(0): Option "FSAAMSPosX3" is not used
(WW) RADEON(0): Option "CenterMode" is not used
(WW) RADEON(0): Option "CalcAlgorithm" is not used
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32