Hallo,
mein WLAN unter Suse 11 funktioniert nicht.
Es ist ähnlich wie in diesem Thread:
nur habe ich keine Ahnung wie ich die Firmware installieren kann.
diesen Thread
habe ich durchgearbeitet, auch erfolgreich wie es scheint.
mein WLAN unter Suse 11 funktioniert nicht.
Es ist ähnlich wie in diesem Thread:
Code:
http://www.pc-forum24.de/suse-internetkonfiguration/10016-geloest-wlan-hotkey-auf-acer-aspire-5020-tot-unter-opensuse-11-64-bit.html
diesen Thread
Code:
http://www.pc-forum24.de/suse-internetkonfiguration/9675-geloest-suse-11-wlan-atheros-fs-amilo-1650g-acer-wmi-statt-acer_acpi.html
Code:
uname -r
2.6.27.7-9-default
Code:
cat /etc/SuSE-release
openSUSE 11.1 (x86_64)
VERSION = 11.1
Code:
/sbin/lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 AudioController (rev 02)
00:14.6 Modem: ATI Technologies Inc SB400 AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] AddressMap
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
Code:
/usr/sbin/hwinfo --wlan
19: PCI 605.0: 0282 WLAN controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_14e4_4318
Unique ID: y9sn.zSF_tyDUJv5
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:06:05.0
SysFS BusID: 0000:06:05.0
Hardware Class: network
Model: "AMBIT Microsystem Aspire 3022WLMi, 5024WLMi, 5020"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
SubVendor: pci 0x1468 "AMBIT Microsystem Corp."
SubDevice: pci 0x0311 "Aspire 3022WLMi, 5024WLMi, 5020"
Revision: 0x02
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0xc0204000-0xc0205fff (rw,non-prefetchable)
IRQ: 21 (no events)
HW Address: 00:14:a4:55:79:19
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.4572.462
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d00004318sv00001468sd00000311bc02sc80i00"
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)
Code:
sudo grep -i radio /var/log/messages
Mar 15 17:02:16 linux-3pg1 sudo: root : TTY=pts/1 ; PWD=/root ; USER=root ;COMMAND=/bin/grep -i radio /var/log/messages