(Gelöst) Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Mathefreak007 · 14 März 2007

Moin,

hab auf dem Notebook Suse 10.2 und ne PCMCIA-Karte mit Chipsatz Realtek RTL8185.
Hab auch den neuesten ndiswrapper nach Anleitung installiert, Karte wird erkannt, ich kann das Router-Setup aufrufen (d.h. die Karte funkt).
Nur beim Zugriff auf Internetseiten kann er vermutlich die Namen nicht auflösen (Zuordnung per DHCP).
Nun wollte ich dieses Prüf-Script starten, um die Experten hier mit mehr Infos zu versorgen, aber beim Aufruf (vorher root werden mit su) passiert gar nichts.
Bin leider relativer Linux-Laie, kann mir jemand sagen, wie man die Probleme lösen kann (Internet, ggf. Script starten für weitere Hilfen)?

Danke und Gruß
M.

Jacko · 14 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Hallo Mathefreak007,

Eine Vermutung habe ich, jedoch brauchen wir hier unbedingt mehr Infos.

Welche? Lese und poste:

http://www.pc-forum24.de/sonstige/2976-users4users-poste-ich-bei-welchem-problem.html#post13622

Grüße

Jacko

Mathefreak007 · 15 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

@jacko:

ich werd die Infos raussuchen und posten, aber das mit dem Script bekomme ich nicht hin. Wie genau muss man das starten?

Jacko · 16 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Wie das mit dem Script funktioniert steht hier (HP von framp) ganz ausführlich.

Diese Seite ist aber auch im entsprechenden User4Users Thread verlinkt

Grüße

Jacko

Mathefreak007 · 21 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Nach einigem Rumprobieren hier nun der Output des Scripts.
Erstmal die erste Hälfte (wegen zu vielen Zeichen im Beitrag, der zweite Teil folgt im nächsten Beitrag)

Teil 1:

Code:

collectNWData.sh V0.4.0 (linux_at_framp_dot_de)

--- Hi. I'm an experimental version of NWEliza and try to help you to solve your network problem.
--- I'm now analyzing the data which was collected right now.

The system can't ping an external IP address.
There is no default gateway set on your system
The system can't resolve an external DNS name.
Check your nameserver definition
======================================================================================================
======================================================================================================
*** uname -a 
Linux EINSTEIN 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386 GNU/Linux
======================================================================================================
*** cat /etc/SuSE-release 
openSUSE 10.2 (i586)
VERSION = 10.2
======================================================================================================
*** cat /etc/resolv.conf | grep -v "^#" | grep -v "^$" 
nameserver 192.168.2.1
search site
======================================================================================================
*** cat /etc/hosts | grep -v "^#" | grep -v "^$" | grep -v "::" 
127.0.0.1       localhost
127.0.0.2       EINSTEIN.site EINSTEIN
======================================================================================================
*** cat /proc/sys/net/ipv4/ip_forward 
0
======================================================================================================
*** iptables -t nat -L 
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
======================================================================================================
*** route -n 
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 wlan0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 wlan0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
======================================================================================================
*** ifconfig 
eth0      Link encap:Ethernet  HWaddr 00:08:02:6D:D8:2A  
          UP BROADCAST NOTRAILERS MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:67 errors:0 dropped:0 overruns:0 frame:0
          TX packets:67 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:5470 (5.3 Kb)  TX bytes:5470 (5.3 Kb)

wlan0     Link encap:Ethernet  HWaddr 00:E0:4C:F1:71:56  
          inet addr:192.168.2.101  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::2e0:4cff:fef1:7156/64 Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1831 errors:0 dropped:0 overruns:0 frame:0
          TX packets:125 errors:0 dropped:5 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:165987 (162.0 Kb)  TX bytes:13410 (13.0 Kb)
          Interrupt:11 Memory:22000000-22000025 

======================================================================================================
*** pingTests 
127.0.0.1 : Ping OK
192.168.2.101 : Ping OK
connect: Network is unreachable
195.135.220.3 : No ping response
connect: Network is unreachable
www.suse.de : No ping response
======================================================================================================
*** lspci 
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:04.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
02:0e.0 USB Controller: NEC Corporation USB (rev 41)
02:0e.1 USB Controller: NEC Corporation USB (rev 41)
02:0e.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
======================================================================================================
*** lsusb 
Bus 003 Device 001: ID 0000:0000  
Bus 001 Device 003: ID 04f3:0210 Elan Microelectronics Corp. 
Bus 001 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000

Werden weitere Infos benötigt?
Unter Windows wird eigentlich alles über DHCP festgelegt, das habe ich hier auch eingestellt.
Irgendwie werden externe Adressen nicht erreicht, vermutlich, weil er die IP nicht auflösen kann. Aber wo kann man das einstellen? Ich habe schon versucht, die Router-Adresse als Nameserver einzustellen bzw. auch die jeweils in der Status-Seite des Routers angezeigte IP des DNS, aber es ändert sich nichts.

Danke schon mal und Gruß
M.

Mathefreak007 · 21 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

und hier Teil 2:
(Teil 3 folgt auch noch, irgendwie gehen nur 18000 Zeichen pro Beitrag

)

Code:

======================================================================================================
*** iptables -L -vn 
Chain INPUT (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    4   336 ACCEPT     0    --  lo     *       0.0.0.0/0            0.0.0.0/0           
    1    73 ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
    0     0 input_ext  0    --  eth0   *       0.0.0.0/0            0.0.0.0/0           
    1   110 input_ext  0    --  wlan0  *       0.0.0.0/0            0.0.0.0/0           
    0     0 input_ext  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-IN-ILL-TARGET ' 
    0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-FWD-ILL-ROUTING ' 

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    4   336 ACCEPT     0    --  *      lo      0.0.0.0/0            0.0.0.0/0           
    2   167 ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW,RELATED,ESTABLISHED 
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-OUT-ERROR ' 

Chain forward_ext (0 references)
 pkts bytes target     prot opt in     out     source               destination         

Chain input_ext (3 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           PKTTYPE = broadcast 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           icmp type 4 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 0 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 3 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 11 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 12 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 14 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 18 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 3 code 2 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 5 
    0     0 reject_func  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:113 state NEW 
    1   110 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 PKTTYPE = multicast LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    1   110 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           PKTTYPE = multicast 
    0     0 LOG        tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 tcp flags:0x17/0x02 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    0     0 LOG        icmp --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    0     0 LOG        udp  --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 state INVALID LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT-INV ' 
    0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain reject_func (1 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 REJECT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           reject-with tcp-reset 
    0     0 REJECT     udp  --  *      *       0.0.0.0/0            0.0.0.0/0           reject-with icmp-port-unreachable 
    0     0 REJECT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           reject-with icmp-proto-unreachable 
======================================================================================================
*** cat /etc/sysconfig/SuSEfirewall2 | grep -v "^#" | grep -v "^$" 
FW_DEV_EXT="any eth-id-00:08:02:6d:d8:2a wlan-bus-pcmcia"
FW_DEV_INT=""
FW_DEV_DMZ=""
FW_ROUTE="no"
FW_MASQUERADE="no"
FW_MASQ_DEV="$FW_DEV_EXT"
FW_MASQ_NETS="0/0"
FW_PROTECT_FROM_INT="no"
FW_SERVICES_EXT_TCP=""
FW_SERVICES_EXT_UDP=""
FW_SERVICES_EXT_IP=""
FW_SERVICES_EXT_RPC=""
FW_CONFIGURATIONS_EXT=""
FW_SERVICES_DMZ_TCP=""
FW_SERVICES_DMZ_UDP=""
FW_SERVICES_DMZ_IP=""
FW_SERVICES_DMZ_RPC=""
FW_CONFIGURATIONS_DMZ=""
FW_SERVICES_INT_TCP=""
FW_SERVICES_INT_UDP=""
FW_SERVICES_INT_IP=""
FW_SERVICES_INT_RPC=""
FW_CONFIGURATIONS_INT=""
FW_SERVICES_DROP_EXT=""
FW_SERVICES_REJECT_EXT="0/0,tcp,113"
FW_SERVICES_ACCEPT_EXT=""
FW_TRUSTED_NETS=""
FW_ALLOW_INCOMING_HIGHPORTS_TCP=""
FW_ALLOW_INCOMING_HIGHPORTS_UDP=""
FW_FORWARD=""
FW_FORWARD_MASQ=""
FW_REDIRECT=""
FW_LOG_DROP_CRIT="yes"
FW_LOG_DROP_ALL="no"
FW_LOG_ACCEPT_CRIT="yes"
FW_LOG_ACCEPT_ALL="no"
FW_LOG_LIMIT=""
FW_LOG=""
FW_KERNEL_SECURITY="yes"
FW_STOP_KEEP_ROUTING_STATE="no"
FW_ALLOW_PING_FW="yes"
FW_ALLOW_PING_DMZ="no"
FW_ALLOW_PING_EXT="no"
FW_ALLOW_FW_SOURCEQUENCH=""
FW_ALLOW_FW_BROADCAST_EXT="no"
FW_ALLOW_FW_BROADCAST_INT="no"
FW_ALLOW_FW_BROADCAST_DMZ="no"
FW_IGNORE_FW_BROADCAST_EXT="yes"
FW_IGNORE_FW_BROADCAST_INT="no"
FW_IGNORE_FW_BROADCAST_DMZ="no"
FW_ALLOW_CLASS_ROUTING=""
FW_CUSTOMRULES=""
FW_REJECT=""
FW_REJECT_INT="yes"
FW_HTB_TUNE_DEV=""
FW_IPv6=""
FW_IPv6_REJECT_OUTGOING=""
FW_IPSEC_TRUST="no"
FW_ZONES=""
FW_USE_IPTABLES_BATCH=""
FW_LOAD_MODULES=""
FW_FORWARD_ALWAYS_INOUT_DEV=""
FW_SERVICES_ACCEPT_INT=""
FW_SERVICES_ACCEPT_DMZ=""
======================================================================================================
*** cat /etc/sysconfig/network/config | grep -v "^#" | grep -v "^$" 
DEFAULT_BROADCAST="+"
GLOBAL_POST_UP_EXEC="yes"
GLOBAL_PRE_DOWN_EXEC="yes"
CHECK_DUPLICATE_IP="no"
DEBUG="no"
USE_SYSLOG="yes"
MODIFY_RESOLV_CONF_DYNAMICALLY="yes"
MODIFY_NAMED_CONF_DYNAMICALLY="no"
MODIFY_RESOLV_CONF_STATIC_DNS=""
CONNECTION_SHOW_WHEN_IFSTATUS="no"
CONNECTION_CHECK_BEFORE_IFDOWN="no"
CONNECTION_CLOSE_BEFORE_IFDOWN="no"
CONNECTION_UMOUNT_NFS_BEFORE_IFDOWN="no"
CONNECTION_SEND_KILL_SIGNAL="no"
MANDATORY_DEVICES=""
WAIT_FOR_INTERFACES="20"
FIREWALL="yes"
LINKLOCAL_INTERFACES="eth*[0-9]|tr*[0-9]|wlan[0-9]|ath[0-9]"
IFPLUGD_OPTIONS="-f -I -b"
FORCE_PERSISTENT_NAMES="yes"
NETWORKMANAGER="no"
NM_ONLINE_TIMEOUT="0"
 
NM_DISPATCHER="yes"
======================================================================================================
*** cat /etc/sysconfig/sysctl | grep -v "^#" | grep -v "^$" 
IP_DYNIP="no"
IP_TCP_SYNCOOKIES="yes"
IP_FORWARD="no"
IPV6_FORWARD="no"
IPV6_PRIVACY=no
IPV6_MLD_VERSION=""
DISABLE_ECN="yes"
DMAPI_PROBE="no"
ENABLE_SYSRQ="no"
======================================================================================================
*** cat /etc/sysconfig/network/dhcp | grep -v "^#" | grep -v "^$" 
DHCLIENT_MODIFY_SMB_CONF="yes"
DHCLIENT_BIN=""
DHCLIENT_DEBUG="no"
DHCLIENT_SET_HOSTNAME="yes"
DHCLIENT_MODIFY_RESOLV_CONF="yes"
DHCLIENT_SET_DEFAULT_ROUTE="yes"
DHCLIENT_MODIFY_NTP_CONF="no"
DHCLIENT_MODIFY_NIS_CONF="yes"
DHCLIENT_SET_DOMAINNAME="yes"
DHCLIENT_KEEP_SEARCHLIST="yes"
DHCLIENT_LEASE_TIME=""
DHCLIENT_TIMEOUT="999999"
DHCLIENT_REBOOT_TIMEOUT=""
DHCLIENT_HOSTNAME_OPTION="AUTO"
DHCLIENT_CLIENT_ID=""
DHCLIENT_VENDOR_CLASS_ID=""
DHCLIENT_RELEASE_BEFORE_QUIT="no"
DHCLIENT_SCRIPT_EXE=""
DHCLIENT_UDP_CHECKSUM="yes"
DHCLIENT_ADDITIONAL_OPTIONS=""
DHCLIENT_SLEEP="0"
DHCLIENT_WAIT_AT_BOOT="5"
WRITE_HOSTNAME_TO_HOSTS="yes"
======================================================================================================
*** cat /etc/sysconfig/proxy | grep -v "^#" | grep -v "^$" 
PROXY_ENABLED="no"
HTTP_PROXY=""
HTTPS_PROXY=""
FTP_PROXY=""
GOPHER_PROXY=""
NO_PROXY="localhost, 127.0.0.1"

Mathefreak007 · 21 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

und weil es so schön war, hier der Teil 3:

Code:

======================================================================================================
*** cat /etc/sysconfig/ssh | grep -v "^#" | grep -v "^$" 
SSHD_OPTS=""
======================================================================================================
*** /usr/sbin/iwconfig | /bin/sed "s/\(Encryption key:\)\([^o][^f][^f][^ ]*\)\(.*\)/\1xx xxx-xxxx-xxxx-xxxx-xxxx-xxxxxxx\3/" 
lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

wlan0     IEEE 802.11b  ESSID:"Mathefreak"  
          Mode:Managed  Frequency:2.432 GHz  Access Point: 00:01:E3:0F:38:F7   
          Bit Rate=54 Mb/s   Tx-Power:-2147483648 dBm   Sensitivity=0/3  
          RTS thr:off   Fragment thr:off
          Encryption key:xx xxx-xxxx-xxxx-xxxx-xxxx-xxxxxxx   Security mode:restricted
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

======================================================================================================
*** catMyConfig 
======================================================================================================
*** cat /etc/sysconfig/network/ifcfg-eth-id-00:08:02:6d:d8:2a
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IFPLUGD_PRIORITY='20'
IPADDR=''
MTU=''
NAME='Compaq 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
UNIQUE='rBUF.nEQI0Q+pNEF'
USERCONTROL='no'
_nm_name='bus-pci-0000:02:08.0'
======================================================================================================
*** cat /etc/sysconfig/network/ifcfg-lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
STARTMODE=onboot
USERCONTROL=no
======================================================================================================
*** cat /etc/sysconfig/network/ifcfg-wlan-bus-pcmcia
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IFPLUGD_PRIORITY='10'
IPADDR=''
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
WIRELESS_AP=''
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_CA_CERT=''
WIRELESS_CHANNEL=''
WIRELESS_CLIENT_CERT=''
WIRELESS_CLIENT_KEY=''
WIRELESS_CLIENT_KEY_PASSWORD=''
WIRELESS_DEFAULT_KEY='0'
WIRELESS_EAP_AUTH=''
WIRELESS_EAP_MODE=''
WIRELESS_ESSID='Mathefreak'
WIRELESS_FREQUENCY=''
WIRELESS_KEY=''
WIRELESS_KEY_0=''
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Managed'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_PEAP_VERSION=''
WIRELESS_POWER='yes'
WIRELESS_WPA_ANONID=''
WIRELESS_WPA_IDENTITY=''
WIRELESS_WPA_PASSWORD=''
WIRELESS_WPA_PSK='******'
_nm_name='static-0'

Sorry for spamming, aber es lag nicht an mir (hoffe ich

)

Jacko · 21 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Wenn ich das recht sehe, erhälst Du zwar per DHCP eine IP Adresse und einen Namesserver, aber keinen Gateway.

Vergebe eine feste IP und trage als Gateway und Namesserver die IP Deines Routers ein, fertig.

Grüße

Jacko

Mathefreak007 · 22 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

@Jacko:

danke für den Hinweis. Kannst du mir noch kurz sagen, wie man das konkret macht unter Suse 10.2?

Danke und Gruß
M.

Mathefreak007 · 22 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Moin,

nun funzt es doch mit DHCP. Fragt nicht warum. Hauptsache es lüppt

Kernelman · 22 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Hallo,

Mathefreak007 schrieb:
nun funzt es doch mit DHCP. Fragt nicht warum. Hauptsache es lüppt

Es ist stärker als ich, ich kann nicht anders.

Warum funzt es jetzt?

Was hast du gemacht?

Gruß

KM

Mathefreak007 · 28 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Moin,

sorry, hat etwas länger gedauert. Ich poste nochmal das Script-Out, was ich konkret geändert habe, weiß ich auch nicht - sieht man vielleicht beim Vergleich. Hab auf jeden Fall die normale Netzwerkkarte deaktiviert, weil ich die nicht nutze. Ansonsten ein bisschen in den Einstellungen (DNS, Gateway, ...) rumgespielt.
Teil 1:

Code:

collectNWData.sh V0.4.0 (linux_at_framp_dot_de)

--- Hi. Ich bin eine experimentelle Version von NWEliza und versuche Dir bei Deinem Netzwerkproblem zu helfen.
--- Ich analysiere die eben gesammelten Daten.

======================================================================================================
======================================================================================================
*** uname -a 
Linux EINSTEIN 2.6.18.2-34-default #1 SMP Mon Nov 27 11:46:27 UTC 2006 i686 i686 i386 GNU/Linux
======================================================================================================
*** cat /etc/SuSE-release 
openSUSE 10.2 (i586)
VERSION = 10.2
======================================================================================================
*** cat /etc/resolv.conf | grep -v "^#" | grep -v "^$" 
search site
nameserver 192.168.2.1
======================================================================================================
*** cat /etc/hosts | grep -v "^#" | grep -v "^$" | grep -v "::" 
127.0.0.1       localhost
127.0.0.2       EINSTEIN.site EINSTEIN
======================================================================================================
*** cat /proc/sys/net/ipv4/ip_forward 
0
======================================================================================================
*** iptables -t nat -L 
Chain PREROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain POSTROUTING (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         
======================================================================================================
*** route -n 
Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use Iface
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0 wlan0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 wlan0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.2.1     0.0.0.0         UG    0      0        0 wlan0
======================================================================================================
*** ifconfig 
lo        Protokoll:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:81 errors:0 dropped:0 overruns:0 frame:0
          TX packets:81 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:6644 (6.4 Kb)  TX bytes:6644 (6.4 Kb)

wlan0     Protokoll:Ethernet  Hardware Adresse 00:E0:4C:F1:71:56  
          inet Adresse:192.168.2.102  Bcast:192.168.2.255  Maske:255.255.255.0
          inet6 Adresse: fe80::2e0:4cff:fef1:7156/64 Gültigkeitsbereich:Verbindung
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:7645 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3198 errors:0 dropped:5 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:6238676 (5.9 Mb)  TX bytes:1172332 (1.1 Mb)
          Interrupt:11 Speicher:22000000-22000025 

======================================================================================================
*** pingTests 
127.0.0.1 : Ping OK
192.168.2.102 : Ping OK
195.135.220.3 : Ping OK
www.suse.de : Ping OK
======================================================================================================
*** lspci 
00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:04.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
02:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
02:0e.0 USB Controller: NEC Corporation USB (rev 41)
02:0e.1 USB Controller: NEC Corporation USB (rev 41)
02:0e.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
======================================================================================================
*** lsusb 
Bus 001 Device 003: ID 04f3:0210 Elan Microelectronics Corp. 
Bus 001 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
======================================================================================================
*** iptables -L -vn 
Chain INPUT (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    4   336 ACCEPT     0    --  lo     *       0.0.0.0/0            0.0.0.0/0           
 4441 5882K ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
   37  5411 input_ext  0    --  wlan0  *       0.0.0.0/0            0.0.0.0/0           
    0     0 input_ext  0    --  *      *       0.0.0.0/0            0.0.0.0/0           
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-IN-ILL-TARGET ' 
    0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-FWD-ILL-ROUTING ' 

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    4   336 ACCEPT     0    --  *      lo      0.0.0.0/0            0.0.0.0/0           
 3155 1124K ACCEPT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW,RELATED,ESTABLISHED 
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-OUT-ERROR ' 

Chain forward_ext (0 references)
 pkts bytes target     prot opt in     out     source               destination

Mathefreak007 · 28 März 2007

AW: Problem: Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Teil 2:

Code:

Chain input_ext (2 references)
 pkts bytes target     prot opt in     out     source               destination         
   17  1477 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           PKTTYPE = broadcast 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           icmp type 4 
   17  3604 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           icmp type 8 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 0 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 3 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 11 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 12 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 14 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 18 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 3 code 2 
    0     0 ACCEPT     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED icmp type 5 
    0     0 reject_func  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:113 state NEW 
    3   330 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 PKTTYPE = multicast LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    3   330 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           PKTTYPE = multicast 
    0     0 LOG        tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 tcp flags:0x17/0x02 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    0     0 LOG        icmp --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    0     0 LOG        udp  --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT ' 
    0     0 LOG        0    --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 3/min burst 5 state INVALID LOG flags 6 level 4 prefix `SFW2-INext-DROP-DEFLT-INV ' 
    0     0 DROP       0    --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain reject_func (1 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 REJECT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           reject-with tcp-reset 
    0     0 REJECT     udp  --  *      *       0.0.0.0/0            0.0.0.0/0           reject-with icmp-port-unreachable 
    0     0 REJECT     0    --  *      *       0.0.0.0/0            0.0.0.0/0           reject-with icmp-proto-unreachable 
======================================================================================================
*** cat /etc/sysconfig/SuSEfirewall2 | grep -v "^#" | grep -v "^$" 
FW_DEV_EXT="any eth-id-00:08:02:6d:d8:2a wlan-bus-pcmcia"
FW_DEV_INT=""
FW_DEV_DMZ=""
FW_ROUTE="no"
FW_MASQUERADE="no"
FW_MASQ_DEV="$FW_DEV_EXT"
FW_MASQ_NETS="0/0"
FW_PROTECT_FROM_INT="no"
FW_SERVICES_EXT_TCP=""
FW_SERVICES_EXT_UDP=""
FW_SERVICES_EXT_IP=""
FW_SERVICES_EXT_RPC=""
FW_CONFIGURATIONS_EXT=""
FW_SERVICES_DMZ_TCP=""
FW_SERVICES_DMZ_UDP=""
FW_SERVICES_DMZ_IP=""
FW_SERVICES_DMZ_RPC=""
FW_CONFIGURATIONS_DMZ=""
FW_SERVICES_INT_TCP=""
FW_SERVICES_INT_UDP=""
FW_SERVICES_INT_IP=""
FW_SERVICES_INT_RPC=""
FW_CONFIGURATIONS_INT=""
FW_SERVICES_DROP_EXT=""
FW_SERVICES_REJECT_EXT="0/0,tcp,113"
FW_SERVICES_ACCEPT_EXT=""
FW_TRUSTED_NETS=""
FW_ALLOW_INCOMING_HIGHPORTS_TCP=""
FW_ALLOW_INCOMING_HIGHPORTS_UDP=""
FW_FORWARD=""
FW_FORWARD_MASQ=""
FW_REDIRECT=""
FW_LOG_DROP_CRIT="yes"
FW_LOG_DROP_ALL="no"
FW_LOG_ACCEPT_CRIT="yes"
FW_LOG_ACCEPT_ALL="no"
FW_LOG_LIMIT=""
FW_LOG=""
FW_KERNEL_SECURITY="yes"
FW_STOP_KEEP_ROUTING_STATE="no"
FW_ALLOW_PING_FW="yes"
FW_ALLOW_PING_DMZ="no"
FW_ALLOW_PING_EXT="no"
FW_ALLOW_FW_SOURCEQUENCH=""
FW_ALLOW_FW_BROADCAST_EXT="no"
FW_ALLOW_FW_BROADCAST_INT="no"
FW_ALLOW_FW_BROADCAST_DMZ="no"
FW_IGNORE_FW_BROADCAST_EXT="yes"
FW_IGNORE_FW_BROADCAST_INT="no"
FW_IGNORE_FW_BROADCAST_DMZ="no"
FW_ALLOW_CLASS_ROUTING=""
FW_CUSTOMRULES=""
FW_REJECT=""
FW_REJECT_INT="yes"
FW_HTB_TUNE_DEV=""
FW_IPv6=""
FW_IPv6_REJECT_OUTGOING=""
FW_IPSEC_TRUST="no"
FW_ZONES=""
FW_USE_IPTABLES_BATCH=""
FW_LOAD_MODULES=""
FW_FORWARD_ALWAYS_INOUT_DEV=""
FW_SERVICES_ACCEPT_INT=""
FW_SERVICES_ACCEPT_DMZ=""
======================================================================================================
*** cat /etc/sysconfig/network/config | grep -v "^#" | grep -v "^$" 
DEFAULT_BROADCAST="+"
GLOBAL_POST_UP_EXEC="yes"
GLOBAL_PRE_DOWN_EXEC="yes"
CHECK_DUPLICATE_IP="no"
DEBUG="no"
USE_SYSLOG="yes"
MODIFY_RESOLV_CONF_DYNAMICALLY="yes"
MODIFY_NAMED_CONF_DYNAMICALLY="no"
MODIFY_RESOLV_CONF_STATIC_DNS=""
CONNECTION_SHOW_WHEN_IFSTATUS="no"
CONNECTION_CHECK_BEFORE_IFDOWN="no"
CONNECTION_CLOSE_BEFORE_IFDOWN="no"
CONNECTION_UMOUNT_NFS_BEFORE_IFDOWN="no"
CONNECTION_SEND_KILL_SIGNAL="no"
MANDATORY_DEVICES=""
WAIT_FOR_INTERFACES="20"
FIREWALL="yes"
LINKLOCAL_INTERFACES="eth*[0-9]|tr*[0-9]|wlan[0-9]|ath[0-9]"
IFPLUGD_OPTIONS="-f -I -b"
FORCE_PERSISTENT_NAMES="yes"
NETWORKMANAGER="no"
NM_ONLINE_TIMEOUT="0"
 
NM_DISPATCHER="yes"
======================================================================================================
*** cat /etc/sysconfig/sysctl | grep -v "^#" | grep -v "^$" 
IP_DYNIP="no"
IP_TCP_SYNCOOKIES="yes"
IP_FORWARD="no"
IPV6_FORWARD="no"
IPV6_PRIVACY="no"
IPV6_MLD_VERSION=""
DISABLE_ECN="yes"
DMAPI_PROBE="no"
ENABLE_SYSRQ="no"
======================================================================================================
*** cat /etc/sysconfig/network/dhcp | grep -v "^#" | grep -v "^$" 
DHCLIENT_MODIFY_SMB_CONF="yes"
DHCLIENT_BIN=""
DHCLIENT_DEBUG="no"
DHCLIENT_SET_HOSTNAME="yes"
DHCLIENT_MODIFY_RESOLV_CONF="yes"
DHCLIENT_SET_DEFAULT_ROUTE="yes"
DHCLIENT_MODIFY_NTP_CONF="no"
DHCLIENT_MODIFY_NIS_CONF="yes"
DHCLIENT_SET_DOMAINNAME="yes"
DHCLIENT_KEEP_SEARCHLIST="yes"
DHCLIENT_LEASE_TIME=""
DHCLIENT_TIMEOUT="999999"
DHCLIENT_REBOOT_TIMEOUT=""
DHCLIENT_HOSTNAME_OPTION="AUTO"
DHCLIENT_CLIENT_ID=""
DHCLIENT_VENDOR_CLASS_ID=""
DHCLIENT_RELEASE_BEFORE_QUIT="no"
DHCLIENT_SCRIPT_EXE=""
DHCLIENT_UDP_CHECKSUM="yes"
DHCLIENT_ADDITIONAL_OPTIONS=""
DHCLIENT_SLEEP="0"
DHCLIENT_WAIT_AT_BOOT="5"
WRITE_HOSTNAME_TO_HOSTS="yes"
======================================================================================================
*** cat /etc/sysconfig/proxy | grep -v "^#" | grep -v "^$" 
PROXY_ENABLED="no"
HTTP_PROXY=""
HTTPS_PROXY=""
FTP_PROXY=""
GOPHER_PROXY=""
NO_PROXY="localhost, 127.0.0.1"
======================================================================================================
*** cat /etc/sysconfig/ssh | grep -v "^#" | grep -v "^$" 
SSHD_OPTS=""
======================================================================================================
*** /usr/sbin/iwconfig | /bin/sed "s/\(Encryption key:\)\([^o][^f][^f][^ ]*\)\(.*\)/\1xx xxx-xxxx-xxxx-xxxx-xxxx-xxxxxxx\3/" 
lo        no wireless extensions.

eth0      no wireless extensions.

sit0      no wireless extensions.

wlan0     IEEE 802.11b  ESSID:"Mathefreak"  
          Mode:Managed  Frequency:2.432 GHz  Access Point: 00:01:E3:0F:38:F7   
          Bit Rate=54 Mb/s   Tx-Power:-2147483648 dBm   Sensitivity=0/3  
          RTS thr:off   Fragment thr:off
          Encryption key:xx xxx-xxxx-xxxx-xxxx-xxxx-xxxxxxx   Security mode:restricted
          Power Management:off
          Link Quality:76/100  Signal level:-47 dBm  Noise level:-96 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

======================================================================================================
*** catMyConfig 
======================================================================================================
*** cat /etc/sysconfig/network/ifcfg-lo
IPADDR=127.0.0.1
NETMASK=255.0.0.0
NETWORK=127.0.0.0
BROADCAST=127.255.255.255
STARTMODE=onboot
USERCONTROL=no
======================================================================================================
*** cat /etc/sysconfig/network/ifcfg-wlan-bus-pcmcia
BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IFPLUGD_PRIORITY='10'
IPADDR=''
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
WIRELESS_AP=''
WIRELESS_AUTH_MODE='psk'
WIRELESS_BITRATE='auto'
WIRELESS_CA_CERT=''
WIRELESS_CHANNEL=''
WIRELESS_CLIENT_CERT=''
WIRELESS_CLIENT_KEY=''
WIRELESS_CLIENT_KEY_PASSWORD=''
WIRELESS_DEFAULT_KEY='0'
WIRELESS_EAP_AUTH=''
WIRELESS_EAP_MODE=''
WIRELESS_ESSID='Mathefreak'
WIRELESS_FREQUENCY=''
WIRELESS_KEY=''
WIRELESS_KEY_0=''
WIRELESS_KEY_1=''
WIRELESS_KEY_2=''
WIRELESS_KEY_3=''
WIRELESS_KEY_LENGTH='128'
WIRELESS_MODE='Managed'
WIRELESS_NICK=''
WIRELESS_NWID=''
WIRELESS_PEAP_VERSION=''
WIRELESS_POWER='yes'
WIRELESS_WPA_ANONID=''
WIRELESS_WPA_IDENTITY=''
WIRELESS_WPA_PASSWORD=''
WIRELESS_WPA_PSK='******'
_nm_name='static-0'

(Gelöst) Suse 10.2 mit PCMCIA-WLAN mit RTL8185

Mathefreak007

New Member

Jacko

Moderator

Mathefreak007

New Member

Jacko

Moderator

Mathefreak007

New Member

Mathefreak007

New Member

Mathefreak007

New Member

Jacko

Moderator

Mathefreak007

New Member

Mathefreak007

New Member

Kernelman

Member

Mathefreak007

New Member

Mathefreak007

New Member